oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if145.0m-d 145.00mhz if saw filter 9.24 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if145.0m-d january 2011 rev a 145.00mhz if saw filter 9.24 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1=27 nh, c1=82 pf output l2=22 nh, c2=82 pf source/load impedance 50 ?
oscilent part number 835-if145.0m-d january 2011 rev a 145.00mhz if saw filter 9.24 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 145.0 - insertion loss at fo db - 25.6 27.5 group delay variation (fo4.52mhz) ns - 97 150 absolute delay time at fo us - 4.27 - temperature coefficient ppm/ c - -18 - amplitude ripple (fo4.52mhz) db - 0.66 1.00 bandwidth at -1db mhz 9.04 9.25 - bandwidth at -3db mhz - 9.44 - bandwidth at -50db mhz - 10.28 - relative attenuation fo 5.1mhz~ fo 5.9mhz dbc 24 38 - fo 5.9mhz~ fo 9.9mhz dbc 39 48 - fo 9.9mhz~ fo 14.9mhz dbc 39 50 - fo 14.9mhz~ fo 20.0mhz dbc 49 60 - ultimate rejection db - 50 -
oscilent part number 835-if145.0m-d january 2011 rev a 145.00mhz if saw filter 9.24 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?50.0 db relative attenuation
oscilent part number 835-if145.0m-d january 2011 rev a 145.00mhz if saw filter 9.24 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo4.52mhz group delay variation fo4.52mhz smith chart
oscilent part number 835-if145.0m-d january 2011 rev a 145.00mhz if saw filter 9.24 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|